rss
RSS
csende
Search
News
Limited edition of DC/DS-24
Image

 

 

 

We would like to introduce you a special limited edition of ten DC/DS-24 transmitters, which was created for the 75th anniversary of the end of World War II. Unfortunately, the release of this series last year was significantly affected by a global pandemic, which also affected our plans. The limited edition is intended for end customers, collectors and fans of JETI and is created in the spirit of flying legends of World War II. Each transmitter has original design, which was artistically painted directly on the transmitter (Airbrush).

You can find more information and photos on our Facebook profile JETI Model.

 

 

 

Two updates have been released via JETI Studio.
Image

 

 

 

1.    REX Assist v1.19 (03/2021)
Airplane pitch with Assist enabled is no longer affected by acceleration (Horizon mode).

2.    MVario2 FAI F5J v2.05 (03/2021)
Supports new sensor revision.

Central Box update v1.10
Image
New version of SW v1.10 intended for Central Box 210/220.

-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)

The update can be done by the Jeti Studio.

AC Speed Controllers

 
The speed controllers are available in 2 main types; for brushed motors (DC – commutator) and for brushless motors BLDC. Other factors in the selection of the controller are the voltage range of the drive batteries, current demands of the motor, and the  method used to power the receiver and servos. Jeti speed controllers normally provide thermal protection, protection of the battery against low voltage (LVC), and over current protection. BEC (Battery Eliminator Circuit) controllers include an integrated circuit to provide a stabilized power supply to power the receiver and servos.

Controllers that do not have BEC are marked OPTO, and require the use of a receiver battery (4 or 5 x NiXX), or an external BEC (Jeti MAX BEC is recommended for use with up to 12 cell NiXX, 3S LiPo, or 4S A123). OPTO controllers are designed to provide complete electrical isolation of the power supply from the radio system. OPTO controllers are recommended when BEC circuits are not sufficient for your needs because of a high servo count, the use of digital servos, or for models with high current consumption or high operating voltage.

Individual lines of controllers

Application

Types according to

current [A]

Types according to

voltage [V]

BEC

Parameter adjustment possibilities

Telemetry

ECO

Beginners

12 - 25

5 - 16

linear

Jumper

No

ADVANCE

Advanced

4 - 90

5 - 42

linear

Prog Card

No

HiCOPTER

Multicopter

30 - 90

5 - 42

-

-

No

MASTER

Specials for Hacker

4 - 195

5 - 42

linear

Prog Box

No

SPIN

Demanding applications

11 - 200

5-59

switching

JETIBOX

JETIBOX

MEZON

High power airplanes and helis

75 - 165

6-59

switching

JETIBOX

JETIBOX, EX

MEZON PRO

High power airplanes (hotliner)

40 - 80

5 - 51

switching

JETIBOX / JETI transmitters

JETIBOX, EX Bus

 
 
Ordering type
Show

SPIN Pro 80

Art. No.: JSP-80
SPIN Pro 80

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 100

Art. No.: JSP-100
SPIN Pro 100

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

SPIN Pro 160

Art. No.: JSP-160
SPIN Pro 160

The SPIN Pro line offers, in comparison with the predecessors, increased adjustment possibilities, such as automatic motor timing, shut-off voltage adjustments practicable directly in volts, tuning of start-up properties for different motor types, as well as new possibilities of mode activation for setting up autorotation of helicopters.

HiCOPTER 77A opto

Art. No.: J-HIC-77-O
HiCOPTER 77A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

Advance 10 Pro

Art. No.: JA-10-P
Advance 10 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

MEZON 40 PRO LMR

Art. No.: JMP-040-LMR
MEZON 40 PRO LMR

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.

LMR (Limited Motor Run) - the controller is especially designed for glider models. The continuous motor run is limited to a few seconds.

MEZON 70 PRO LMR

Art. No.: JMP-070-LMR
MEZON 70 PRO LMR

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.

LMR (Limited Motor Run) - the controller is especially designed for glider models. The continuous motor run is limited to a few seconds.

MEZON 50 PRO

Art. No.: JMP-050
MEZON 50 PRO

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.

 

MEZON 80 PRO

Art. No.: JMP-080
MEZON 80 PRO

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.



MEZON 85 PRO opto

Art. No.: JMP-085-O
MEZON 85 PRO opto

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come an optocoupler, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.



MEZON 55 PRO opto

Art. No.: JMP-055-O
MEZON 55 PRO opto

Powerful MEZON PRO controllers can be used in a wide variety of applications. They come an optocoupler, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.



Partners
Alltron.ch Esprit Hacker Hepf

JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com