Catalogue
News
Limited edition of DC/DS-24
We would like to introduce you a special limited edition of ten DC/DS-24 transmitters, which was created for the 75th anniversary of the end of World War II. Unfortunately, the release of this series last year was significantly affected by a global pandemic, which also affected our plans. The limited edition is intended for end customers, collectors and fans of JETI and is created in the spirit of flying legends of World War II. Each transmitter has original design, which was artistically painted directly on the transmitter (Airbrush).
You can find more information and photos on our Facebook profile JETI Model.
Two updates have been released via JETI Studio.
1. REX Assist v1.19 (03/2021)
Airplane pitch with Assist enabled is no longer affected by acceleration (Horizon mode).
2. MVario2 FAI F5J v2.05 (03/2021)
Supports new sensor revision.
Central Box update v1.10
New version of SW v1.10 intended for Central Box 210/220.
-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)
The update can be done by the Jeti Studio.
-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)
The update can be done by the Jeti Studio.
AC Speed Controllers
The speed controllers are available in 2 main types; for brushed motors (DC – commutator) and for brushless motors BLDC. Other factors in the selection of the controller are the voltage range of the drive batteries, current demands of the motor, and the method used to power the receiver and servos. Jeti speed controllers normally provide thermal protection, protection of the battery against low voltage (LVC), and over current protection. BEC (Battery Eliminator Circuit) controllers include an integrated circuit to provide a stabilized power supply to power the receiver and servos.
Controllers that do not have BEC are marked OPTO, and require the use of a receiver battery (4 or 5 x NiXX), or an external BEC (Jeti MAX BEC is recommended for use with up to 12 cell NiXX, 3S LiPo, or 4S A123). OPTO controllers are designed to provide complete electrical isolation of the power supply from the radio system. OPTO controllers are recommended when BEC circuits are not sufficient for your needs because of a high servo count, the use of digital servos, or for models with high current consumption or high operating voltage.
Controllers that do not have BEC are marked OPTO, and require the use of a receiver battery (4 or 5 x NiXX), or an external BEC (Jeti MAX BEC is recommended for use with up to 12 cell NiXX, 3S LiPo, or 4S A123). OPTO controllers are designed to provide complete electrical isolation of the power supply from the radio system. OPTO controllers are recommended when BEC circuits are not sufficient for your needs because of a high servo count, the use of digital servos, or for models with high current consumption or high operating voltage.
|
Individual lines of controllers |
Application |
Types according to current [A] |
Types according to voltage [V] |
BEC |
Parameter adjustment possibilities |
Telemetry |
|
ECO |
Beginners |
12 - 25 |
5 - 16 |
linear |
Jumper |
No |
|
ADVANCE |
Advanced |
4 - 90 |
5 - 42 |
linear |
Prog Card |
No |
|
HiCOPTER |
Multicopter |
30 - 90 |
5 - 42 |
- |
- |
No |
|
MASTER |
Specials for Hacker |
4 - 195 |
5 - 42 |
linear |
Prog Box |
No |
|
SPIN |
Demanding applications |
11 - 200 |
5-59 |
switching |
JETIBOX |
JETIBOX |
|
MEZON |
High power airplanes and helis |
75 - 165 |
6-59 |
switching |
JETIBOX |
JETIBOX, EX |
|
MEZON PRO |
High power airplanes (hotliner) |
40 - 80 |
5 - 51 |
switching |
JETIBOX / JETI transmitters |
JETIBOX, EX Bus |
MEZON 115 opto (RPM)
Art. No.: Standard: JM- 115-O, RPM: JM- 115-O-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
MEZON 135 opto (RPM)
Art. No.: Standard: JM-135-O, RPM: JM-135-O-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
MEZON 165 opto (RPM)
Art. No.: Standard: JM-165-O, RPM: JM-165-O-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
MEZON 75 opto (RPM)
Art. No.: Standard: JM-075-O, RPM: JM-075-O-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
MEZON 95 opto (RPM)
Art. No.: Standard: JM-095-O, RPM: JM-095-O-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESC´s does not contain any BEC circuit.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESC´s does not contain any BEC circuit.
MEZON 120 (RPM)
Art. No.: Standard: JM-120, RPM: JM-120-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
MEZON 130 (RPM)
Art. No.: Standard: JM-130, RPM: JM-130-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
MEZON 160 (RPM)
Art. No.: Standard: JM-160, RPM: JM-160-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
MEZON 90 (RPM)
Art. No.: Standard: JM-090, RPM: JM-090-RPM
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
HiCOPTER 30A opto
Art. No.: J-HIC-30-O
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.
HiCOPTER 40A opto
Art. No.: J-HIC-40-O
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.
HiCOPTER 70A opto
Art. No.: J-HIC-70-O
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.
HiCOPTER 90A opto
Art. No.: J-HIC-90-O
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.
MEZON 90 lite
Art. No.: JM-090-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
MEZON 120 lite
Art. No.: JM-120-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
MEZON 130 lite
Art. No.: JM-130-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
MEZON 160 lite
Art. No.: JM-160-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
MEZON 95 opto lite
Art. No.: JM- 095-O-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESC´s does not contain any BEC circuit.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESC´s does not contain any BEC circuit.
MEZON 135 opto lite
Art. No.: JM-135-O-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
MEZON 165 opto lite
Art. No.: JM-165-O-L
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.
