rss
RSS
csende
Search
Catalogue
News
Limited edition of DC/DS-24
Image

 

 

 

We would like to introduce you a special limited edition of ten DC/DS-24 transmitters, which was created for the 75th anniversary of the end of World War II. Unfortunately, the release of this series last year was significantly affected by a global pandemic, which also affected our plans. The limited edition is intended for end customers, collectors and fans of JETI and is created in the spirit of flying legends of World War II. Each transmitter has original design, which was artistically painted directly on the transmitter (Airbrush).

You can find more information and photos on our Facebook profile JETI Model.

 

 

 

 
Two updates have been released via JETI Studio.
Image

 

 

 

1.    REX Assist v1.19 (03/2021)
Airplane pitch with Assist enabled is no longer affected by acceleration (Horizon mode).

2.    MVario2 FAI F5J v2.05 (03/2021)
Supports new sensor revision.

 
Central Box update v1.10
Image
New version of SW v1.10 intended for Central Box 210/220.

-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)

The update can be done by the Jeti Studio.
 
More news  »

Speed Controllers

 img

Electronic Speed Controllers

Several product lines of electronic speed controllers for versatile use in model hobby. Available are DC controllers as well as AC synchronous speed controllers. You can select from our solutions for airplane models, helicopters, multicopters and boats.

  

AC Speed ControllersDC Speed Controllers
Ordering
Ordering type
Show

Advance 10 Pro

Art. No.: JA-10-P
Advance 10 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Advance 12 Pro

Art. No.: JA-12-P-P
Advance 12 Pro

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

 

Advance 30 Pro SB

Art. No.: JA-30-P-P-SB
Advance 30 Pro SB

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

Switching BEC.

 

Advance 40 Pro opto

Art. No.: JA-40-P-P-O
Advance 40 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 40 Pro SB HS

Art. No.: JA-40-P-P-SB-HS
Advance 40 Pro SB HS

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

SB: Switching BEC.

HS: High Speed. Suitable for high RPM motors.

 

Advance 70 Pro opto

Art. No.: JA-70-P-P-O
Advance 70 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 70 Pro SB HS

Art. No.: JA-70-P-P-SB-HS
Advance 70 Pro SB HS

The Advance controllers will fully comply with all requirements of the user and in connection with the programming card, they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

SB: Switching BEC.

HS: High Speed. Suitable for high RPM motors.

 

Advance 77 Pro opto

Art. No.: JA-77-P-P-O
Advance 77 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance 90 Pro opto

Art. No.: JA-90-P-P-O
Advance 90 Pro opto

The Advance Pro controllers will fully comply with all requirements of the user and in connection with the programming card they will fulfill even the most ambitious wishes. The programming card (ProgCard Plus) is compatible with controllers of the Advance Plus line and simultaneously with the Advance Pro line.

The Opto-Controllers provide a galvanic separation between the power drive (motor, controller, flight battery) and the receiver with servos.

Advance Pro ProgCard

Art. No.: JA-PPPC
Advance Pro ProgCard
The programming card ProgCard Pro is determined for adjustments of the Advance Plus controller family (on the side of the programming card you will find the inscription Advance ProgCard plus), as well as for adjustments of the Advance Pro controller (on the side of the programming card you will find the inscription Advance ProgCard Pro).

HiCOPTER 30A opto

Art. No.: J-HIC-30-O
HiCOPTER 30A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

HiCOPTER 40A opto

Art. No.: J-HIC-40-O
HiCOPTER 40A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

HiCOPTER 70A opto

Art. No.: J-HIC-70-O
HiCOPTER 70A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

HiCOPTER 77A opto

Art. No.: J-HIC-77-O
HiCOPTER 77A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

HiCOPTER 90A opto

Art. No.: J-HIC-90-O
HiCOPTER 90A opto
Speed controllers of HiCOPTER product line are aimed for controlling and regulating BLDC motors that are used for driving multicopters. These controllers are pre-set from the manufacturer for the cooperation with stabilization systems used in copters. The controllers accept control signal with a frequency up to 500Hz and they respond to the needed change of revolutions from control/stabilization unit of the copter.

JES 006

Art. No.: JJ-006
JES 006
JES 006 is the smallest DC speed controller suitable for engines of the 300 series or smaller. It offers switch-on/switch-off brake and it enables operating with NICd/NIMh/LIon/LIPol accumulators.

JES 020 plus

Art. No.: JJ-020
JES 020 plus
JES 020 is a DC speed controller suitable for engines of 400, 480 series or 400 with transmission. It offers switch-on/switch-off brake and it enables operating with NICd/NIMh/LIon/LIPol accumulators.

JES 045 plus

Art. No.: JJ-045
JES 045 plus
JES 045 is DC speed controller suitable for powerful SMCO engines. It offers switch-on/switch-off brake and it enables operating with NICd/NIMh/LIon/LIPol accumulators.

MEZON 115 opto (RPM)

Art. No.: Standard: JM- 115-O, RPM: JM- 115-O-RPM
MEZON 115 opto (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.

The OPTO line of MEZON Brushless ESC´s feature an optically separated radio signal from the power management circuitry which guarantees an interference-free operation. The OPTO line of brushless ESCs does not contain any BEC circuit.

MEZON 120 (RPM)

Art. No.: Standard: JM-120, RPM: JM-120-RPM
MEZON 120 (RPM)
Jeti MEZON ESC´s advanced design and software are capable of unique precise and efficient motor control. Our MEZON ESC´s are able to be fully integrated with the DUPLEX EX systems. With the DUPLEX integration, all data are measured in real time. Mezon ESC´s were designed to be able to measure the exact battery capacity used and let you set up a motor cut off point based not only on cell voltage, but also on overall battery pack capacity.
   1  2  3 
1 - 20 from: 54
Partners
Alltron.ch Esprit Hacker Hepf

 JETI Italia Topmodel.fr
www.pimpyourjeti.de jetiforum JETI magazin egadgets
 Opale

Customer support:

Phone/Fax: +420 556 802 092 between 8:00 - 10:00 (CET)     |     E-mail: jeti@jetimodel.com     |     Web: www.jetimodel.com