
We would like to introduce you a special limited edition of ten DC/DS-24 transmitters, which was created for the 75th anniversary of the end of World War II. Unfortunately, the release of this series last year was significantly affected by a global pandemic, which also affected our plans. The limited edition is intended for end customers, collectors and fans of JETI and is created in the spirit of flying legends of World War II. Each transmitter has original design, which was artistically painted directly on the transmitter (Airbrush).
You can find more information and photos on our Facebook profile JETI Model.

1. REX Assist v1.19 (03/2021)
Airplane pitch with Assist enabled is no longer affected by acceleration (Horizon mode).
2. MVario2 FAI F5J v2.05 (03/2021)
Supports new sensor revision.

-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)
The update can be done by the Jeti Studio.
MGPS EX
Weight [g] | 24 |
Dimensions [mm] | 50 x 30 x 13 |
Operational temperature [°C] | -10 ... 85 |
Supply Voltage [V] | 3,5 - 8,4 |
Average Current [mA] | 40 |
Memory [MB] | 4 |
Files for download
Manuals - MGPS EX
Software - MGPS
Update - MGPS EX
Exact information about the altitude and distance of a model in space are extremely important guidance elements for the pilot who is remote controlling the model. Thanks to the GPS satellite positioning system the MGPS sensor defines the exact model position and calculates speed, altitude and distance from the point of origin, furthermore the course, azimuth and the total covered distance.
In order to be able to record the measured data the MGPS sensor is equipped with a memory for approximately 9 hours of uninterrupted data recording with a numerosity of one record per second (4 MB MGPS version). For a simple analysis of measured data the sensor keeps information of minima and maxima which can be browsed with the aid of the JETIBOX. A more detailed analysis of measured data can be achieved by copying data from the sensor to a PC and map depicted trajectories or carry out other analysis modes. With the aid of the wireless DUPLEX system actual information of the MGPS sensor can be transmitted and depicted in real time by the JETIBOX terminal or DC/DS transmitters.
For showing GPD data you can use link http://www.gpsvisualizer.com
Driver for USB adapter is Here