We would like to introduce you a special limited edition of ten DC/DS-24 transmitters, which was created for the 75th anniversary of the end of World War II. Unfortunately, the release of this series last year was significantly affected by a global pandemic, which also affected our plans. The limited edition is intended for end customers, collectors and fans of JETI and is created in the spirit of flying legends of World War II. Each transmitter has original design, which was artistically painted directly on the transmitter (Airbrush).
You can find more information and photos on our Facebook profile JETI Model.
1. REX Assist v1.19 (03/2021)
Airplane pitch with Assist enabled is no longer affected by acceleration (Horizon mode).
2. MVario2 FAI F5J v2.05 (03/2021)
Supports new sensor revision.
-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)
The update can be done by the Jeti Studio.
LiIon Accu
POWER-Ion accumulators are suitable for a general use in model hobby.
Main advantages of Power-Ion accumulators:
- mechanical durability
- overvoltage protection
- overcurrent protection - 150Amps
- high-rate charging with electric current up to 4Amps
- high operating safety
- long lifetime
- great in low temperatures
- discharging current 2100 : 25A, peak 50A per cell
- discharging current 2600 : 20A, peak 40A per cell
- discharging current 2600A : 30A, peak 60A per cell
- discharging current 3100 : 20A, peak 40A per cell
- no need for individual balancing of each cell
- weight of a single cell: 45g
- dimensions: diameter 18mm, length 65mm
- fully charged accu voltage: 4,2 V
JETI model supplies only 2100, 2600 and 3100 mAh accumulators. Selected cells in pack are connected by a soldering process that is considered a basic prerequisite of a longtime stability.
Basic packs: 2S1P, 2S2P, 3S1P flat, 3S1P triangle, 3S2P. If required we can supply up to 10S5P pack.
Discharge characteristics
|
Power Ion 2100 |
Power Ion 2600 |
|
Power Ion 2600A |
Power Ion 3100 |
Basic variants
| Build |
Capacity* [Ah] |
Weight [g] |
Sust. current* [A] |
Peek current* [A] |
Max. charge [V] |
Charge current [A] |
| 2S1P | 2,1/2,6/2,6A/3,1 | 90 | 25 / 20 / 30 / 20 | 50 / 40 / 60 / 40 | 8,4 | 4 |
| 3S1P | 2,1/2,6/2,6A/3,1 | 135 | 25 / 20 / 30 / 20 | 50 / 40 / 60 / 40 | 12,6 | 4 |
| 4S1P | 2,1/2,6/2,6A/3,1 | 180 | 25 / 20 / 30 / 20 | 50 / 40 / 60 / 40 | 16,8 | 4 |
| 6S1P | 2,1/2,6/2,6A/3,1 | 270 | 25 / 20 / 30 / 20 | 50 / 40 / 60 / 40 | 25,2 | 4 |
| 2S2P | 4,2/5,2/5,2A/6,2 | 180 | 50 / 40 / 60 / 40 | 100/80/120/80 | 8,4 | 8 |
| 3S2P | 4,2/5,2/5,2A/6,2 | 270 | 50 / 40 / 60 / 40 | 100/80/120/80 | 12,6 | 8 |
| 4S2P | 4,2/5,2/5,2A/6,2 | 360 | 50 / 40 / 60 / 40 | 100/80/120/80 | 16,8 | 8 |
| 6S2P | 4,2/5,2/5,2A/6,2 | 540 | 50 / 40 / 60 / 40 | 100/80/120/80 | 25,2 | 8 |
| 2S3P | 6,3/7,8/7,8A/9,3 | 270 | 75 / 60 / 90 / 60 | 150/120/180/120 | 8,4 | 12 |
| 3S3P | 6,3/7,8/7,8A/9,3 | 410 | 75 / 60 / 90 / 60 | 150/120/180/120 | 12,6 | 12 |
| 4S3P | 6,3/7,8/7,8A/9,3 | 540 | 75 / 60 / 90 / 60 | 150/120/180/120 | 16,8 | 12 |
| 6S3P | 6,3/7,8/7,8A/9,3 | 810 | 75 / 60 / 90 / 60 | 150/120/180/120 | 25,2 | 12 |
* The values displayed apply for the cells with a nominal capacity of 2100 / 2600 / 2600A / 3100 mAh.
Power Ion 2100 (Single cell)
Power Ion 2600 (Single cell)
Power Ion RB 2600
Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800 – 2S2P are battery packs suitable to power the receiver and servos in the model.
Power Ion RB 5200
Power-Ion accumulators 2600,2900 – 2S1P a 5200,5800 – 2S2P are battery packs suitable to power the receiver and servos in the model.
Power Ion Tx 5200
| 1 1 - 5 from: 5 |
|---|
