
We would like to introduce you a special limited edition of ten DC/DS-24 transmitters, which was created for the 75th anniversary of the end of World War II. Unfortunately, the release of this series last year was significantly affected by a global pandemic, which also affected our plans. The limited edition is intended for end customers, collectors and fans of JETI and is created in the spirit of flying legends of World War II. Each transmitter has original design, which was artistically painted directly on the transmitter (Airbrush).
You can find more information and photos on our Facebook profile JETI Model.

1. REX Assist v1.19 (03/2021)
Airplane pitch with Assist enabled is no longer affected by acceleration (Horizon mode).
2. MVario2 FAI F5J v2.05 (03/2021)
Supports new sensor revision.

-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)
The update can be done by the Jeti Studio.
MAX BEC 2D Plus EX
Weight [g] | 85 |
Dimensions [mm] | 100 x 29 x 16 |
Sustained current [A] | 12 |
Peak current (max 30s) [A] | 20 |
Telemetry | Yes |
Operational temperature [°C] | -10 ... 130 |
Recommended input voltage [V] | 5,5 - 8,4 |
Output voltage [V] | 5,0 - 6,0 |
Idle current [µA] | 240 |
Max. power loss [W] | 20 |
Number of battery inputs | 2 |
Input voltage max. [V] | 16 |
Files for download
Update - Sensors
Manuals - MAX BEC 2D Plus EX
Manufactured according to very high European standards, the MAX BEC 2D plus EX is the latest dual input, linear voltage regulator from JETI. The Max BEC 2D Plus EX includes a magnetic switch, so there is no mechanical wear-and-tear from switching the unit on and off.
The MAX BEC 2D plus EX supports on / off via RC Switch. It can be easily installed.
The unit comes equipped with a large heat-sink to dissipate any excess heat. In addition to its magnetic switch feature, the 2D Plus EX is programmable by using the JETIBOX and is also Duplex 2.4EX compatible.
This allows audible alarms to be configured for low input voltage or high-temperature. When used with the Duplex 2.4EX, it also allows real-time feedback of input voltage and temperature as well as output voltage wirelessly from the JETIBOX profi.
Redundant inputs are provided for power-supply and the output features an MPX type socket, directly supporting Duplex and all Duplex EPC receivers.