
We would like to introduce you a special limited edition of ten DC/DS-24 transmitters, which was created for the 75th anniversary of the end of World War II. Unfortunately, the release of this series last year was significantly affected by a global pandemic, which also affected our plans. The limited edition is intended for end customers, collectors and fans of JETI and is created in the spirit of flying legends of World War II. Each transmitter has original design, which was artistically painted directly on the transmitter (Airbrush).
You can find more information and photos on our Facebook profile JETI Model.

1. REX Assist v1.19 (03/2021)
Airplane pitch with Assist enabled is no longer affected by acceleration (Horizon mode).
2. MVario2 FAI F5J v2.05 (03/2021)
Supports new sensor revision.

-Time interval of the RX alarm was modified to 2s.
-Extension the compatibility for Futaba R7008SB (S.BUS)
The update can be done by the Jeti Studio.
Central Box 400
J-CB-400-RS-RCSW
8595245914028
Weight [g] | 270 |
Dimensions [mm] | 131 x 88 x 19 |
Sustained current [A] | 30 |
Number of channels | 24 |
Telemetry | Yes |
Operational temperature [°C] | -20 ... 75 |
Compatible protocols | EX Bus, PPM |
Supply Voltage [V] | 6 ... 17 |
Satellite receiver support | Yes |
Batteries NiXX | 6 ... 12 |
Batteries LiXX | 2 ... 4 |
Voltage BEC [V] | 5 ... 8 |
Idle current [µA] | 60 |
Number of battery inputs | 2 |
Voltage stabilization | Yes |
Peak current (2s) [A] | 230 |
Files for download
Manuals - Central Box 400
Update - Central Box
The Central Box 400 is a switchboard designed for the complete management of servos in large to giant models with an emphasis on safety. The Central Box 400 has a unique design that provides overload protection at each servo output. An independent, very powerful BEC (battery eliminator circuit) for each battery input makes the Central Box an optimal solution to connect up to 24 servos. The Central Box 400 can manage the batteries and fully supports the JETI EX telemetry system. Up to two receivers with serial (PPM, EX Bus, UDI) output can be connected to the Central Box 400. With a JETI DC/DS transmitter, the full potential of the Central Box can be used, such as easy configuration of the Central Box, EX telemetry, and very fast servo response.
Central Box 400 supports up to 24 protected servo outputs, two battery inputs with voltage regulators and incorporates possibility to connect an RC or magnetic switch.
Attributes
- Two independent high-powered BEC´s for voltage stabilization of servos
- Overload protection on each channel
- Overload protection on Rx, Ext, and Switch outputs
- Possibility to connect up to 2 receivers with serial interface (PPM, EX Bus, UDI)
- Built-in Expander function for up to 4 sensors
- Input for magnetic switch or RC switch
- MPX battery input connectors: 2x
- Stabilized voltage output via a pair of MPX connectors
- 100Hz mode of servo outputs (10ms period)
- Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
- Easy settings changes via DC/DS transmitter
- Internal memory for storage of telemetry data
- USB connectivity for connection to PC
- Easy settings changes via DC/DS transmitter
- Firmware updatable
- Suitable for use with high voltage (HV) servos
- Robust metal construction with mounting holes
- LED status indication
- Each output is individually configurable (channel assignment, trim, reverse, ATV)
Available variants:
Art. No.: | |
J-CB-400-RS-RCSW | Central Box 400 with two satellite receivers Rsat 2 and with RC Switch |
J-CB-400 | Central Box 400 with magnetic key |
Recommended connection of standard (as well as high voltage) servos:
![]() |
![]() |
![]() |
![]() |